My Cart (0)

  • No products in the cart.
Current Image
HV300 Shark Vacuum
0 1 2 3 4

Shark® Rocket® Ultra-Light Corded Stick Vacuum HV300C


At under 9 lbs, this ultra-lightweight corded stick vacuum easily converts to a hand vac for versatile floor-to-ceiling cleaning. Swivel steering allows for excellent control when maneuvering around furniture. It offers two storage options.

SKU: HV300C sharkclean_ca_HV300C
  • Versatile carpet and bare floor cleaning
  • Swivel steering for maneuverability and control
  • Easy pet hair pickup
  • Converts to a hand vacuum to clean above floors
  • Comes with 30 cm crevice tool, wide upholstery tool, wall mount storage hook
  • 293 mL dust cup capacity
  • 2 brushroll speeds
  • 7.6 m cord length
  • 5 year warranty – click here for more info
Wattage 500 watts
Amperage 4.2 amps
Voltage 120 volts
Dust Cup Capacity 293 mL
Bagless Yes
Cleaning Path Width 21.6 cm
Brushroll Speeds 2
Cord Length 7.6 m
Filter Types Washable Foam Filters
Motor Speeds 2
Anti-Allergenic No
Product Length 21.6 cm
Product Width 27 cm
Product Height 78.2 cm
Product Weight 7.6 lbs
  • Dusting Brush
  • 30 cm Crevice Tool
  • Wide Upholstery Tool
  • Wall Mount Storage Hook
  • If your vacuum overheats, the thermostat will automatically turn off the motor. Perform the following steps to restart:

    1. Turn vacuum off and unplug it.
    2. Empty dust cup and clean filters (see Maintenance section).
    3. Check for blockages in the nozzle, wand, handheld vacuum inlet openings, and accessories.
    4. Allow unit to cool for a minimum of 60 minutes.
    5. Plug in vacuum and turn it on.
    • If Brushroll Indicator Light on the floor nozzle turns red, the brushroll has stopped spinning. Immediately turn off and unplug vacuum and remove blockage. Plug back into electrical outlet and turn vacuum on.
    • If Brushroll Indicator Light on the floor nozzle is green, the blockage has been successfully cleared. If the light is still red, please contact Customer Service at 1-855-520-7816.
    • Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.
    • Turn off the unit to disengage the brushroll. To restart, slide the power switch to setting I, Bare Floor/Small Area Rugs.
  • (Refer to Maintenance section for more information.)

    • Check filters to see if they need cleaning. Follow instructions for rinsing and completely air-drying the filters before reinstalling them.
    • Dust cup may be full; empty dust cup.
    • Check floor nozzle for blockages; clear blockages if required.
    • Remove any string, carpet fibers, or hair that may be wrapped around the brushroll.
    • Ensure the base is locked in place by lining it up along the front of the nozzle and rotate down to snap into place until you hear a click. Lock the three locks.