My Cart (0)

  • No products in the cart.
Current Image
IZ140C_Hero_Front
622356559638_2
622356559638_5
622356559638_4
0 1 2 3

Shark® Rocket® Pro Cordless Stick Vacuum IZ140C

$329.98

The Shark® Rocket® Pro Cordless Stick Vacuum combines powerful suction and a self-cleaning brushroll with Dirt Engage™ to deliver unbeatable cleaning on hard floors and carpets vs. all Shark® cordless vacuums with no hair wrap. Its ultra-lightweight design and removable handheld vacuum add to its cordless convenience for floor-to-ceiling cleaning.

SKU: IZ140C sharkclean_ca_IZ140C
  • Powerful suction for whole-home cleaning: dirt, debris, and pet hair
  • Self-cleaning brushroll with Dirt Engage™ – no more hair wrap
  • Dirt Engage™ technology for deep cleaning on floors and carpets
  • Up to 40 minutes of runtime in handheld vacuum mode
  • XL dust cup with CleanTouch™ technology
  • Easily transforms to a hand vacuum for above-floor cleaning
  • Comes with crevice tool and upholstery tool
  • 3.2L dust cup capacity
  • 2 brushroll speeds
  • 5 year warranty – click here for more info
Wattage 181 watts
Amperage 8.83 amps
Voltage 21.6 volts
Dust Cup Capacity 0.34 quarts
Bagless Yes
Cleaning Path Width 27 cm
Brushroll Speeds 2
Number of Filters 3
Filter Type Foam & Felt, Washable Foam Filters
Motor Speeds 2
Anti-Allergenic No
Product Length 26 cm
Product Width 18 cm
Product Height 1.17 m
Product Weight (gross) 6.92 lbs
  • Crevice tool
  • Upholstery tool
    • Bottom LED light is flashing (Fig. A): Battery needs to be charged.
    • Top and bottom LED lights are flashing (Fig. B): Battery temperature is not optimal, so charging is temporarily paused. Leave battery plugged in and charging will resume soon.
    • If top 2 or bottom 2 LED lights are flashing (Fig. C, Fig. D), call Customer Service
  • There are several possible reasons for the vacuum turning off on its own, including blockages, battery issues, and overheating. If vacuum turns off on its own, perform the following steps:

    1. Turn on the vacuum and check the battery indicator lights located on the handheld portion of the vacuum. If recharging is needed, plug in while vacuum is in the off position.
    2. Empty dust cup and clean filters (See Emptying the Dust Cup and Cleaning the Filters sections).
    3. Check wand, accessories, and inlet openings and remove any blockages.
    4. Allow unit and battery to cool for at least 45 minutes, until they return to room temperature.
    5. Restart with power/selector switch.

    NOTE: if Vacuum still does not operate properly, contact customer service

    • Immediately turn off the vacuum. Remove any blockages before turning the vacuum back on. Make sure the handheld vacuum is tilted back far enough for the brushroll to engage while in use.
    • If the floor nozzle has headlights and they are not illuminated, there is a connection issue between the handheld vacuum, wand, and nozzle. Try disconnecting and reattaching the pieces.
    • Make sure you are not engaging boost mode. Take care when vacuuming area rugs or rugs with delicately sewn edges.
    • Turn off the unit to disengage the brushroll and restart with the power/selector switch.
    • Dust cup may be full; empty dust cup.
    • Check floor nozzle for blockages; clear blockages if required.
    • Remove any string, carpet fibers, or hair that may be wrapped around the brushroll.
    • Check connection between handheld vacuum and wand for blockages; clear blockages if required.
    • Check clog access in wand for any blockages and clear any debris.
    • Check filters to see if they need cleaning. Follow instructions for rinsing and completely air-drying the filter before reinserting in the vacuum.