My Cart (0)

  • No products in the cart.
Current Image
0 1 2 3 4

Shark® Rocket® Pet Pro Cordless Stick Vacuum IZ162HC


The Shark® Rocket® Pet Pro Cordless Stick Vacuum was designed for homes with pets. It combines powerful suction and a self-cleaning brushroll with Dirt Engage™ technology to deliver unbeatable cleaning on hard floors and carpets vs. all Shark® cordless vacuums with no hair wrap. Its lightweight design and removable handheld vacuum deliver cordless cleaning from floor to ceiling.


SKU: IZ162HC sharkclean_ca_IZ162HC
  • Powerful suction for whole-home cleaning: dirt, debris, and pet hair
  • Self-cleaning brushroll with Dirt Engage™ – no more hair wrap
  • Dirt Engage™ technology for deep cleaning on floors and carpets
  • Up to 40 minutes of runtime in handheld vacuum mode
  • Removable battery for charging in or out of the unit
  • Anti-Allergen Complete Seal Technology® and a HEPA filter
  • Comes with crevice tool, upholstery tool, battery
  • 322 mL dust cup capacity
  • 2 brushroll speeds
  • 5 year warranty – click here for more info
Wattage 181 watts
Amperage 8.4 amps
Voltage 21.6 volts
Dust Cup Capacity 322 mL
Bagless Yes
Cleaning Path Width 10.63 inches
Brushroll Speeds 2
Filter Type HEPA
Anti-Allergenic Yes
Product Length 26 cm
Product Width 18 cm
Product Height 1.17 m
Product Weight (gross) 7.17 lbs
  • Crevice tool
  • Upholstery tool
    • Bottom LED light is flashing (Fig. A): Battery needs to be charged.
    • Top and bottom LED lights are flashing (Fig. B): Battery temperature is not optimal, so charging is temporarily paused. Leave battery plugged in and charging will resume soon.
    • If top 2 or bottom 2 LED lights are flashing (Fig. C, Fig. D), call Customer Service.
  • There are several possible reasons for the vacuum turning off on its own, including blockages, battery

    issues, and overheating. If vacuum turns off on its own, perform the following steps:

    1. Check LED lights on the battery to see if it needs to be recharged. If recharging is not needed, turn off vacuum and remove the battery.
    2. Empty dust cup and clean filters (See Emptying the Dust Cup and Cleaning the Filters sections).
    3. Check wand clog access door, accessories, and inlet openings and remove any blockages.
    4. Allow unit and battery to cool for at least 45 minutes, until they return to room temperature.
    5. Return battery to vacuum and restart with power/selector switch.

    Note: If vacuum still does not operate properly, contact Customer Service.

    • Immediately turn off the vacuum. Remove any blockages, then turn on the power and tilt the handle back to engage the brushroll.
    • If the floor nozzle has headlights and they are not illuminated, there is a connection issue between the handheld vacuum, wand, and nozzle. Try disconnecting and reattaching the pieces.
    • Take care when vacuuming area rugs or rugs with delicately sewn edges.
    • Turn off the unit to disengage the brushroll and restart with the power/selector switch.
    • Dust cup may be full; empty dust cup.
    • Check floor nozzle for blockages; clear blockages if required.
    • Remove any string, carpet fibers, or hair that may be wrapped around the brushroll.
    • Check connection between handheld vacuum and wand for blockages; clear blockages if required.
    • Check clog access door in wand for any blockages and clear any debris.
    • Check filters to see if they need cleaning. Follow instructions for rinsing and completely air-drying the filters before reinserting in the vacuum.