$279.99
The Shark® Rocket® Complete with DuoClean® Technology features a bristle brush to deep clean carpets and an additional soft brushroll to pull in larger particles and directly engage floors for a polished look. At under 10 lbs, this ultra-lightweight upright vacuum easily converts to a handheld vacuum for versatile floor-to-ceiling cleaning. It also has powerful LED lights on the handheld vacuum and nozzle and brushroll access for quick and easy maintenance, and an upholstery tool for capturing embedded pet hair on surfaces.
Wattage | 505 watts |
Amperage | 4.2 amps |
Voltage | 120 volts |
Dust Cup Capacity | 630 g |
Cleaning Path Width | 22 cm |
Motor Speeds | 2 |
Cord Length | 9 m |
Filter Types | Washable Foam Filters |
Anti-Allergenic | Yes |
Product Length | 22 cm |
Product Width | 28 cm |
Product Height | 83 cm |
Product Weight | 5 kg |
• Upholstery Tool
• Dusting Brush
• 12” Crevice Tool
• Wall Mount Storage Hook
This vacuum is equipped with a motor-protective thermostat so the vacuum will shut
off if it overheats. Should this occur, perform the following steps to restart the motorprotective thermostat:
1. Turn vacuum off and unplug it.
2. Empty dust cup and clean filters (see Maintenance section).
3. Check for blockages in hose, accessories, and inlet openings.
4. Allow unit to cool for a minimum of 45 minutes.
5. Plug in vacuum and turn it on.
Note: If vacuum still does not start, contact Customer Service at 1-855-520-7816.
• If Brushroll Indicator Light on the floor nozzle turns red, the brushroll and/or Soft
Roller have stopped spinning. Immediately turn off and unplug vacuum and remove
blockage before reconnecting and turning vacuum back on.
• If Brushroll Indicator Light on the floor nozzle is green, the blockage has been
successfully cleared. If the light is still red, please contact Customer Service at
1-855-520-7816.
• Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.
• Turn off the unit to disengage the brushroll then slide the Power switch to Setting I (Bare Floor, Area Rugs) to restart.
(Refer to Maintenance section for more information.)
• Check filters to see if they need cleaning. Follow instructions for rinsing and completely air-drying the filters before reinserting in the vacuum.
• Dust cup may be full; empty dust cup.
• Check floor nozzle for blockages; clear blockages if required.
• Remove any string, carpet fibers, or hair that may be wrapped around the brushroll and Soft Roller or trapped behind the Soft Roller.