My Cart (0)

  • No products in the cart.
Current Image
qyrzdxuf4uxn1zfypzjz
doqfis8cnmikjxmnxc0k
dvmggdhuko0en76qepwy
rktmiljuvxomi4whk7rp
0 1 2 3

Shark® Navigator® Self-Cleaning Brushroll Pet Upright Vacuum ZU62C

$249.99

The Shark Navigator® Pet Upright Vacuum has been designed with pets in mind by integrating multiple cleaning technologies into one upright vacuum. Pet hair on carpets and floors doesn’t stand a chance. The Shark Navigator® Pet has 3XL capacity for uninterrupted, whole-home cleaning. The self-cleaning brushroll delivers nonstop hair removal. With an integrated extendable hose, your cleaning doesn’t have to stop at the floor—vacuum stairs, furniture, and tight spaces with up to 12 feet of total reach. When you’ve finished vacuuming, Anti-Allergen Complete Seal Technology® and a HEPA filter keep particles trapped inside the vacuum, out of the air you breathe.

Qty:
SKU: ZU62C sharkclean_ca_ZU62C
  • Self-Cleaning Brushroll – No More Hair Wrap
  • Powerful Performance and Strong Suction
  • 3XL Capacity for Heavy-Duty Cleaning
  • Anti-Allergen Complete Seal Technology® and a HEPA Filter Trap Dust and Debris
  • Up to 12 Feet of Total Reach for Cleaning Above the Floor
  • Comes with crevice tool, upholstery tool, dusting brush
  • 2.8 qt dust cup capacity
  • 2 brushroll speeds
  • 25 ft cord length, 12 ft hose length
  • 5 year warranty – click here for more info
Wattage 1150 watts
Amperage 9.5 amps
Voltage 120 volts
Dust Cup Capacity 2.8 quarts
Bagless Yes
Cleaning Path Width 11.96 inches
Brushroll Speeds 2
Cord Length 25 feet
Hose Length 12 feet
Filter Type Washable HEPA + Foam and Felt Filters
Anti-Allergenic Yes
Product Length 9.84 inches
Product Width 11.96 inches
Product Height 45.27 inches
Product Weight 16 pounds
  • Duster Crevice Tool
  • Upholstery Tool
  • Dusting Brush
  • This vacuum is equipped with a motor-protective thermostat. If your vacuum overheats, the thermostat will automatically turn the suction motor off. Perform the following steps to restart the thermostat:

    1. Turn vacuum off and unplug it.
    2. Empty dust cup and clean filters (see Emptying the Dust Cup and Cleaning the Filters).
    3. Check for blockages in hose, accessories, and inlet openings.
    4. Allow unit to cool for a minimum of 45 minutes.
    5. Plug in vacuum and turn it on.
    6. Restart the unit with the Power/Surface switch.
    • If the Brushroll Indicator Light turns red, immediately turn off and unplug the vacuum. Remove pod from floor nozzle and clear any blockages. Reconnect nozzle, plug in vacuum, and turn on power.
    • With the power on, recline the handle, which will automatically turn on the brushroll.
    • Ensure that the Power/Surface switch is set to Carpet (setting II) for brushroll to spin.
    • Make sure Power/Surface switch is set to Hard Floor (setting I).
    • Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.
  • Check filters to see if they need cleaning. Follow instructions for rinsing and air-drying the filters before reinserting in the vacuum.

    • Dust cup may be full; empty dust cup.
    • Check hose, hose connections, nozzle, wand, pod, and accessories for blockages. Clear any blockages found.
    • If any string, carpet fibers, or hair is wrapped around the brushroll, extend cleaning time to allow Zero-M™ technology to remove it.

    – If some hair or fibers remain wrapped around brushroll after continued use, remove the floor nozzle cover and carefully cut debris with scissors and remove from brushroll.