My Cart (0)

  • No products in the cart.
Current Image
dkdzdozjy9ugpwkwuv9l
ima6d5kcxcil9ulz09wl
lqpmmzk76rehjdupolqt
yzjy3tyvd0aprc65sys0
0 1 2 3

Shark® Navigator® Lift-Away™ ADV Upright Vacuum LA301C

$189.99

Shark’s best-selling vacuum of all time has evolved. Powerful suction on floors and deep carpet cleaning combine with an amazing above-floor experience—just detach the Lift-Away pod with an easy foot pedal to take on the whole home. Anti-Allergen Complete Seal locks in pollutants and dust and expels cleaner air into your home. Effortlessly maneuver with swivel steering and a lightweight design.

 

Qty:
SKU: LA301C sharkclean_ca_LA301C
  • Lift-Away® with the pod release pedal to clean stairs, overhead areas and more
  • Anti-Allergen Complete Seal Technology® and a HEPA filter for clean air
  • Deep cleaning on carpets and gentle on hard floors with powerful pet hair pickup
  • Lightweight versatility in every mode with whole-home cleaning capacity
  • Advanced Swivel Steering and smart handle ergonomics for excellent control
  • Comes with 8”crevice tool, upholstery tool
  • 0.89 qt dust cup capacity
  • 1 brushroll speeds
  • 25 ft cord length
  • 5 year warranty – click here for more info
Wattage 960 watts
Dust Cup Capacity 0.89 quarts
Bagless Yes
Cleaning Path Width 9.25 inches
Brushroll Speeds 1
Cord Length 25 feet
Filter Types Washable HEPA + Foam Filters
Anti-Allergenic Yes
Product Length 10 inches
Product Width 12 inches
Product Height 46.5 inches
Product Weight (gross) 12.3 pounds
  • 8″ Crevice Tool
  • Upholstery Tool
  • If your vacuum overheats, the thermostat will automatically turn the suction motor off.

    Perform the following steps to restart the thermostat:

    1. Turn vacuum off and unplug it.
    2. Empty dust cup and clean filters (see Emptying the Dust Cup and Cleaning the Filters).
    3. Check for blockages in hose, nozzle, accessories, and inlet openings.
    4. Allow unit to cool for a minimum of 60 minutes.
    5. Plug in vacuum and restart with the Power/Surface switch.
    • If the Brushroll Indicator Light turns red, immediately turn off and unplug the vacuum. Remove pod from floor nozzle and clear any blockages. Reconnect nozzle, plug in vacuum,
    • and turn on power.
    • With the power on, recline the handle, which will automatically turn on the brushroll.
    • If this problem persists on thick carpets, move the suction control slider to MIN
    • Make sure Power/Surface switch is set to Hard Floor (setting I).
    • Ensure the suction control slider on the handle is set to MIN.
    • Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.
    • Check filters to see if they need cleaning. Follow instructions for rinsing and air-drying the filters before reinstalling them in the vacuum
    • Dust cup may be full; empty dust cup.
    • Check handle, hose, hose connections, nozzle, wand, pod, and accessories for blockages. Clear any blockages found.
    • If any string, hair, or carpet fibers are wrapped around the brushroll, carefully cut debris with scissors and remove from brushroll. See Nozzle Maintenance section for more information.