My Cart (0)

  • No products in the cart.
Current Image
bksoucni0gu3d4yjhrgh
hrevw9kfrfuidjbg6kat
infqdo34lux4jw6rwjwu
ps1heflzkkvrmh4uit1w
0 1 2 3

Shark® DuoClean™ with Self-Cleaning Brushroll Lift-Away™ Upright Vacuum ZU700C

$279.99

Shark’s full-sized Lift-Away™ upright vacuum with DuoClean™ and self-cleaning brushroll technologies. DuoClean™ features a bristle brush to deep-clean carpets, and an additional soft brushroll to pull in larger particles and directly engage floors for a polished look. The self-cleaning brushroll delivers nonstop hair removal. Lift-Away™ allows you to detach the pod and clean under furniture and above the floor with the push of a button. The LED lights on the handle and floor nozzle provide visibility in dark spaces, allowing for thorough cleaning under furniture, in closets, and more. Equipped with Anti-Allergen Complete Seal Technology™ and a HEPA filter, this vacuum traps dust and debris to keep it out of the air you breathe.

 

Qty:
SKU: ZU700C sharkclean_ca_ZU700C
  • DuoClean™ Picks Up Dust and Debris on Carpets and Floors
  • Self-Cleaning Brushroll – No More Hair Wrap
  • Lift-Away™: Detach Pod for Above-Floor Cleaning
  • Anti-Allergen Complete Seal Technology™ and a HEPA Filter Trap Dust and Allergens
  • Advanced Swivel Steering for Excellent Control
  • LED Headlights Illuminate Hidden Debris
  • Comes with duster crevice tool, pet multi-tool
  • 0.9 qt dust cup capacity
  • 2 brushroll speeds
  • 30 ft cord length, 5.5 ft hose length
  • 5 year warranty – click here for more info
Wattage 900 watts
Amperage 7.5 amps
Voltage 120 volts
Dust Cup Capacity 0.9 quarts
Bagless Yes
Cleaning Path Width 11 inches
Brushroll Speeds 2
Cord Length 30 feet
Hose Length 5.5 feet
Filter Type Washable HEPA & Foam Filters
Anti-Allergenic Yes
Product Length 12.6 inches
Product Width 12.9 inches
Product Height 30.6 inches
Product Weight 16.5 pounds
  • Duster Crevice Tool
  • Pet Multi-Tool
  • This vacuum is equipped with a motor-protective thermostat. If your vacuum overheats, the thermostat will automatically turn the suction motor off. Perform the following steps to restart the thermostat:

    1. Turn vacuum off and unplug it.
    2. Empty dust cup and clean filters (see Emptying the Dust Cup and Cleaning the Filters).
    3. Check for blockages in hose, accessories, and inlet openings.
    4. Allow unit to cool for a minimum of 60 minutes.
    5. Plug in the vacuum and press the selector button to turn it on.
    • If the Brushroll Indicator Light turns red, it could be that the suction is too powerful for your carpet. First, turn off the vacuum. To reduce suction, slide the Suction Control collar towards MIN. Turn the vacuum back on.
    • If the Brushroll Indicator Light is still red, there might be a clog. Immediately turn off and unplug the vacuum. Remove pod from floor nozzle and clear any blockages. Reconnect nozzle, plug in vacuum, and turn on power.
    • With the power on, recline the handle, which will automatically activate the brushrolls.
    • Ensure that the selector switch is set to Carpet for brushroll to spin.
    • If the Brushroll Indicator Light is green and the headlights are flashing, this means that the brushroll garage lid is not properly closed. Press down firmly on both sides of the lid until it clicks into place.
    • Make sure selector switch is set to Hard Floor.
    • Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.
    • To minimize suction, slide the Suction Control collar to MIN.
    • Check filters to see if they need cleaning. Follow instructions for rinsing and air-drying the filters before reinserting in the vacuum
    • Dust cup may be full; empty dust cup.
    • Check hose, hose connections, nozzle, wand, pod, and accessories for blockages. Clear any blockages found.
    • If any hair, string, or carpet fibers are wrapped around the brushroll, extend cleaning time to allow the self-cleaning brushroll to remove them.

    – If some hair or fibers remain wrapped around brushroll after continued use, remove the floor nozzle cover and carefully cut debris with scissors and remove from brushroll.