My Cart (0)
Shark® APEX™ DuoClean™ with Self-Cleaning Brushroll Powered Lift-Away™ Upright Vacuum AZ1002C
$349.99
The Shark® APEX™ full-sized upright vacuum delivers Shark’s ultimate cleaning experience. Equipped with Shark® DuoClean™ technology, it grabs large particles, pulls in piles, and directly engages hard floors for a beautiful, polished look. Powered Lift-Away™ gives you the ability to detach the pod and clean under furniture and above-floor areas with the push of a button. The self-cleaning brushroll delivers nonstop hair removal. The self-cleaning brushroll removes long hair, short hair, and pet hair from the brushroll. The LED lights on the handle and floor nozzle provide visibility in dark spaces, spotlighting hidden debris. With Advanced Anti-Allergen Complete Seal, dust and allergens are trapped inside the vacuum.
Shark® APEX™ DuoClean™ with Self-Cleaning Brushroll Powered Lift-Away™ Upright Vacuum AZ1002C has been added to your cart!
- DuoClean™: Picks Up Dust and Debris on Carpets and Floors
- Self-Cleaning Brushroll – No More Hair Wrap
- Powered Lift-Away™: Extended Reach, Stairs & More
- Anti-Allergen Complete Seal Technology™ and a HEPA Filter
- Active-Glide™ Technology: Smooth maneuverability
- Comes with 12” crevice tool, upholstery tool, pet power brush
- 1.5 qt dust cup capacity
- 3 brushroll speeds
- 30 ft cord length, 5.5 ft hose length
- 5 year warranty – click here for more info
| Wattage | 1350 watts |
| Amperage | 11.3 amps |
| Voltage | 120 volts |
| Dust Cup Capacity | 1.5 quarts |
| Bagless | Yes |
| Cleaning Path Width | 11 inches |
| Brushroll Speeds | 3 |
| Cord Length | 30 feet |
| Hose Length | 5.5 feet |
| Filter Types | Washable HEPA + Foam Filters |
| Anti-Allergenic | Yes |
| Product Length | 11 inches |
| Product Width | 13.5 inches |
| Product Height | 34.5 inches |
| Product Weight | 16 pounds |
- 12″ Crevice Tool
- Upholstery Tool
- Pet Power Brush
-
If your vacuum overheats, the thermostat will automatically turn off the motor. Perform the
following steps to restart:1. Turn vacuum off and unplug it.
2. Empty dust cup and clean filters (see Emptying the Dust Cup and Cleaning the Filters).
3. Check for blockages in hose, wand, floor nozzle, accessories, and inlet openings.
4. Allow unit to cool for a minimum of 60 minutes.
5. Plug in vacuum and turn it on. -
- If the Brushroll Indicator Light turns red, immediately turn off and unplug the vacuum. Remove pod and wand from floor nozzle and clear any blockages. Reconnect nozzle, plug in vacuum, and turn on power.
- With the power on, recline the handle, which will automatically turn on the brushrolls.
- If the brushroll indicator light is green and the headlights are flashing, the brushroll garage lid is not properly installed. Remove the lid by sliding the two release buttons on the floor nozzle. To reinstall, insert the 3 tabs into the 3 slots in the nozzle, then firmly push down on both sides of the lid until it clicks securely into place.
-
- Make sure Surface Selector switch is set to Hard Floor.
- Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.
-
- Check filters to see if they need cleaning. Follow instructions for rinsing and air-drying the filters before reinstalling them.
- Dust cup may be full; empty dust cup.
- Check hose, hose connections, nozzle, wand, pod, and accessories for blockages. Clear any blockages found. (Refer to Checking for Blockages section for more information.)
- If any hair, string, or carpet fibers are wrapped around the brushroll, extend cleaning time to allow the self-cleaning brushroll to remove them. If some hair or fibers remain wrapped around brushroll after continued use, take off the brushroll garage lid and carefully remove them. See Cleaning the Brushroll section for more information.
Shark® Clean
My Shark
Location
Free Delivery
*Offer does not apply outside of Canada. Orders to be shipped to Northwest Territories, Yukon or Nunavut or other territories outside of Canada or to an international address are subject to a surcharge.